2012/06/30

Idea002, Red Ribbon Chain Necklace 真っ赤なリボンのチェーンネックレス

今日はストローで作る「ストローリボン」とゴールドチェーンのネックレスを紹介します。
ビーズは好きなものを組み合わせてOK。ストローリボンはとても軽いため、チェーンからぶら下がるビーズが重りの役割をしてくれます。
今回は、東京の立川駅近くにあるパッケージ屋さんで買った「曲がるストロー」(株式会社シモジマ)のカラーアカを使いました。前回使用した赤色のストロー(有限会社羽柴化成工業)に比べるとより赤色が強く、ストローに厚みがあり、光をあまり通さないのが特徴です。
次回はこの「ストローリボン」で作るリボンピアスを紹介します。




「真っ赤なリボンのチェーンネックレス」の作り方

<材料>
赤色ストロー1本(6.0mm×210mm)、チェーン(線径0.60㎜)2本(50㎝と6㎝)、9ピン1本(0.5x30)、Tピン2本(0.5x30)、丸カン4個(5mm)、カニカン1個、アジャスター1本、ビーズ(ブラック)2個、アクセサリー用丸ペンチ、定規、はさみ、縫い針。(アクセサリーパーツはゴールド色で統一します。)

<作り方>
  1. 長さ10㎝が1本と長さ1㎝を2本用意し、それぞれのストローを縦にまっすぐ切り開きます。
  2. 10㎝のストローの端を中心に向かって折り、カールした端で中央部分を包み込みます。これを左右行いリボンの形にします。(写真下)
  3. リボンの結び目になる中央部分にまずは後ろから1㎝のストローを被せ、その次に前から1㎝のストローを被せます。
  4. 次に縫い針で、中央部分を上から下へまっすぐに刺し、9ピンが通る穴を作ります。(写真下)
  5. リボンに通した9ピンの片方を丸型のアクセサリー用ペンチで穴が同じ向きになるように丸くし、9ピンが抜けないようにします。
  6. 6㎝チェーンの両端にTピンでビーズを付け、チェーンの真ん中より少しずれたところを丸カンに通し、一方の9ピンに付けます。
  7. もう一方の9ピンには、丸カンを付け、そこに50㎝のチェーンを通し、チェーン両端にアジャスターとカニカンをそれぞれ丸カンで付け、完成です。
<ポイント>
ステップ3のストローを中央に向かって折る際、折り目を付けなくても、自然な丸みを帯びたリボン型になります。この丸みを活かすように仕上げると、かわいいストローリボンが作れます。

 How to make "Red Ribbon Chain Necklace"

<Materials>
Red straw 1 (6mmx210mm),  Gold chain (0.60mm) length 50cm & 6cm, Eyepin 1 (0.5x30), Headpin 2 (0.5x30),  Jumprings 4 (5mm), Carab clasp 1, Extention chain 1, Black beads 2, Round pliers, Ruler, Scissors and Needle. (Findings are gold plated)

<Instructions>
  1. Prepare three red straws in 10cm and two 1cm. Cut straight and open each of them.  
  2. With 10cm opened straw, Fold to meet the centre and cover the centre part (Picture). Do the same to the other side and make a ribbon shape.
  3. Cover the centre part with two 1cm opened straws, one from the back side and the other from the front side. 
  4. Stick straight the centre with a needle to make a hole for an eyepin.
  5. Thread  the eyapin to the hole and make a circle with a round pliers. (Horizontal)
  6. Put beads with headpins to the both end of 6cm chain. Thread a jumpring through one of the chain (around the centre) and attach the jumpring to an eyepin.
  7. Thread 50cm chain with extention chain and carab clasp through a jumpring at the other side of eyepin.
<Point>
At step3, do not make a crease when you fold a straw to meet the centre. Straw will shape beautiful roundness naturally. Keep the shape to make a nice straw ribbon.

Step,3

リボン型にします。
Ribbon Shape
(Front, 正面)
縫い針で穴を作ります。
ケガに注意!

0 件のコメント:

コメントを投稿